Installation Yomani

First of all, log in to rv demo company 5.
If you are using the left PC of the secretariat, log in with the following details:

User: jeline
Password: jeline2016

Then indicate that you are going to connect a Yomani com4 at Jeline's POS. Then synchronize the cash register.

- Using the completed fault forms, check which Yomani you need to take from the spare cabinet (Yomani or Yomani ML)
- Write down your POI with the last 4 digits/letters of the defective pin's HW ID
- Connect the pin and start the installation Installation Manual YOMANI v2 1.pdf
- Sometimes the pin immediately asks for the language and POI to be entered.
If this is the case, you can skip step 2.1 of your Worldline instruction document.
If this is not the case, start at step 2.1. Then go to 2.2, then to 2.3. (If you get an error here, you need to call Worldline. Often there is outdated software or another issue) Then go to 3.1.
- After the installation, you can test the pin using the Vic simulator from Worldline.
- After this test, test again using the RV POS